BZFQW - DUNCAN MASK'N PEEL SY 548
- MSDS: BZFQW
- Manufacturer: DUNCAN ENTERPRISES
- Product Name: DUNCAN MASK'N PEEL SY 548
- National Stock Number: 8010-00F048583
Product Identification
Product ID:DUNCAN MASK'N PEEL SY 548
MSDS Date:05/01/1995
FSC:8010
NIIN:00F048583
MSDS Number: BZFQW
Responsible Party
FRESNO, CA 93727-7819
US
Emergency Phone: 303-623-4884/209-445-1222
Info Phone: 209-291-4444
Preparer: SCOTT MATTISON
Cage: 21546
Contractor
Telephone: 209-291-4444
Cage: 21546
Ingredients
AMMONIA, AMMONIUM HYDROXIDE-ANHYDROUS, ANHYDROUS AMMONIA
CAS: 7664-41-7
RTECS: BO0875000
OSHA PEL 50 PPM
ACGIH TLV: 25 PPM
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:AMMONIA CAUSES REVERSIBLE EYE & THROAT
IRRITATION & RESPIRATORY DISTRESS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:AMMONIA CAUSES REVERSIBLE EYE & THROAT
IRRITATION & RESPIRATORY DISTRESS.
First Aid
First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
Fire Fighting
Extinguishing Media:WATER, CO2/DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA APPROVED BY NIOSH. USE WATER SPRAY
TO KEEP CONTAINERS COOL, KEEP SPILLAGE AWAY FROM FIRE & HEAT & TO
KNOCK DOWN VAPORS.
Unusual Fire/Explosion Hazard:BURNING DRY LATEX CREATES DENSE, BLACK
SMOKE W/THE POTENTIAL FOR TOXIC VAPORS.
Accidental Release
Spill Release Procedures:CONFINE AREA TO PREVENT CONTAMINATION OF SEWER
SYSTEM OF GROUND WATER. ABSORB LIQUID ONTO AN APPROPRIATE
ABSORBENT. AREA WILL CAUSE SLIPPERY CONDITIONS.
Handling
Handling and Storage Precautions:AVOID EXTREME TEMPS. KEEP FROM
FREEZING. KEEP SEALED.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:WHEN PERMISSIBLE EXPOSURE LIMITS ARE EXCEEDED,
USE MASK SUPPLIED W/EXTERNAL AIR/OTHER NIOSH APPROVED RESPIRATORY
PROTECTION.
Ventilation:LOCAL EXHAUST RECOMMENDED. MECHANICAL (GENERAL):
RECOMMENDED WHEN SPRAYING. USE RESPIRATOR WHEN SPRAYING.
Protective Gloves:VINYL/RUBBER
Eye Protection:RECOMMENDED
Other Protective Equipment:SAFETY SHOWER/EYE WASH STATIONS.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Spec Gravity:0.96
pH:9.5-10
Evaporation Rate & Reference:(BU AC = 1): 1
Appearance and Odor:CREAM COLORED LIQUID W/SLIGHT AMMONIA ODOR
Stability
Stability Indicator/Materials to Avoid:YES
SOLVENTS, ACIDS, METAL SALTS, OTHER COMPOUNDS.
Stability Condition to Avoid:EXTREME TEMPS, FREEZING.
Hazardous Decomposition Products:THERMAL: TOXIC GASES
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.